Installing Battery - Cantium Scientific MicroBio MB2 Operating Manual

Installing Battery

The battery is held in a compartment at the back of the MicroBio MB2. The
unit is supplied with 4 x AA NiMH rechargeable cells. The cells must be
removed for re-charging.
To open the battery compartment press firmly on the "OPEN" marking on the
battery compartment lid near the serial number label and then slide
downwards.
The orientation of the cells is indicated within the battery compartment.
Carefully replace the lid with an upwards sliding motion ensuring the
"OPEN" marking on the lid is towards the serial number label.
NOTE:
Please read the instructions supplied with the charger before charging
the NiMh cells. To avoid corrosion, we recommend cells are removed
from the unit if it is to be left unused for extended periods and fully
charged before use.
11