Toro 34230 Operator's Manual page 24

Note:
Use this position during carburetor icing
conditions: low outside air temperature with high
relative humidity. Symptoms include the engine
runs rough at idle or low speed, and it discharges
black or white smoke in the exhaust.
•
When operating in a normal ambient air condition,
position the air-cleaner cover with sun decal facing
out (Figure 20).
Note:
Use this position during high outside air
temperature with low relative humidity.
1. Normal ambient air
position
Driving the Machine
CAUTION
The machine can turn rapidly by moving
the steering control to the far right or left.
You may lose control of the machine, which
may injure you and others, and damage the
machine.
• Use caution when making turns.
• Slow down the machine before making
sharp turns.
Important:
If the motion-control lever does not
return to the N
EUTRAL
it, contact an Authorized Service Dealer.
Important:
To begin moving the machine
(forward or backward), the parking-brake lever
must be released (pulled up) before you move the
motion-control lever.
Driving the Machine Forward
1. Move the motion-control lever to the N
position.
2. Release the parking brake.
3. To drive the machine, perform the following:
•
To move the machine forward in a straight
line, center the steering control and move
the motion-control lever forward.
Figure 20
2. Cold ambient air position
position when you release
g023827
•
•
Driving the Machine in Reverse
1. Move the motion-control lever to the N
position.
2. To move the machine rearward in a straight line,
slowly move the motion-control lever rearward.
EUTRAL
24
Note:
The machine moves faster the farther
you move the motion-control lever away from
the N position.
EUTRAL
Figure 21
To turn left or right, move the steering control
toward the desired turn direction.
To stop the machine, move the motion-control
lever in the N position.
EUTRAL
Note:
The stopping distance may vary
depending on the spreader-sprayer load.
Note:
When you release the motion-control
lever, it automatically returns to the N
position.
g020125
EUTRAL
EUTRAL