Product Information - Norcool 60000011 Operating & Installation Instructions Manual

3. Product information

8
The Norcool corner fridge is available in these models; for integration, for integra-
tion with stainless steel door and a freestanding model in all stainless steel.
They are designed for chilling food for use in private households. These User
instructions are general, and apply to all models.
The corner fridge units require a power supply of 220-240VAC 50 Hz and must be
connected to an earthed min. 10A mains socket. The mains socket must be easily
available. Corner fridge units have a capacity of 1161 liters and have 3m2 shelf area
without boxes. The maximum allowable load on door hinges (including furniture
front and goods) is 45kg. Weight of complete cold room door is 15kg. We recom-
mend that heavy products are not placed in the door. Use the shelves or floor.
Always ensure there is sufficient air circulation above and under the fridge (all
models). Freestanding corner fridges must have a gap of minimum 130mm from
top of the cabinet to the kitchen ceiling, and 25mm from bottom of the cabinet to
the kitchen floor. If the corner fridge is to be integrated in a floor to ceiling kitchen,
ensure sufficient air circulation above and under the corner fridge by fitting an air
grille in the plinth and above the door, plus an air duct. See fig. 1. When integrat-
ing, air grilles must always be used. Select right- or left hinging of doors when
installing.
Room temperature where a corner fridge is installed must always be between 16
- 38° C.
A practical equipment pack is also offered to help you keep good order and orga-
nize the inside of the fridge. This consists of a wine shelf, bottle rack for 16 x 1.5
liter bottles and a practical basket for smaller dressing bottles.