Pre-Installation - Norcool 60000011 Operating & Installation Instructions Manual

7. Pre-installation

14
Unpack the cabinet and check it for any transport damage. Do not use a dam-
aged product! In the event of damage, please contact the shipping company and
make sure that the damage is noted on the consignment note. Then check that all
the parts on the parts list at the back of this user guide are present. Contact your
vendor in the event of damage or deficiencies.
The corner fridge units require a power supply of 220-240VAC 50 Hz and must
be connected to an earthed min.10A mains socket. If the cord is not long enough
(3.6 m mains power cable is connected to the back wall.), then en electrician must
install a min. 10A socket closer to the fridge, e.g. on the ceiling above it. Never
allow the unit to be connected to an extension lead permanently. The socket must
be readily accessible for installation/service.
When fitting a new kitchen with a Norcool corner fridge, install the unit before the
rest of the kitchen on the site where it will stand permanently.