Integrating Corner Fridge; Installation Of Furniture Fronts - Norcool 60000011 Operating & Installation Instructions Manual

8. Installation
18
8.3 Integration of corner fridge cabinet (see fig 9)
Adjust and level cabinet floor height in accordance with plinth height of your
kitchen. Depth of cover sides and/or worktop will determine distance from room
corners. Corner fridge may need to be pulled forward, as worktop should not be
deeper than cover side. This will avoid the door hitting the worktop. The ideal
combination is cover sides of 600mm and door plate 595mm. Pull corner 10mm
forward to reduce white line around door as much as possible.
NOTE: Avoid screwing kitchen front too tightly. 1 spacer block is supplied for
each side wall. Do not remove these, as they ensure air circulation and prevent
condensation on walls in the room.
8.4 Fitting furniture fronts (see figures 5, 6 and 8)
1. Hinges. Remember difference between right and left hinge. Remove screws in
countersunk holes on cold room door. Position correct hinge in recess and screw
securely.