Product Information - Norcool G3 Operating & Installation Instructions Manual

2. Safety rules and warnings
62
8. Guarantees for the product's electrical safety may only be given when there is an uninterrupted connection between the
product and an effective grounding system that complies with the applicable local and national regulations. It is extremely
important that this fundamental safety requirement be fulfilled and checked regularly. In the event of any doubts, the wiring
network in the house must be checked by a qualified electrician. The manufacturer cannot be held responsible for product
damage or personal injuries that are due to a deficient or insufficient grounding system, such as electrical shocks for example.
9. If the wiring is damaged or other repairs are necessary, then the work may only be performed by an approved service
technical such that the user is not exposed to any dangers.
10. A guarantee is made only for the product being safe to use if it has been installed and connected up in accordance with
these use and installation instructions.
11. Installation, maintenance and repairs must only be performed by an authorised repairman in accordance with national and
local safety regulations. Repairs and other work by unqualified personnel may be dangerous and the manufacturer will not
be held responsible. The power cord must not be connected to the power grid before maintenance or repairs have been
performed.
12. The product is only completely disconnected from the power supply when:
a. the mains plug. has been pulled out
b. The fuse in the house installation is completely disconnected
c. The screw fuse has been removed (in countries where this is relevant)
13. Do not connect the product to the power grid with an extension cord. Extension cords do not provide satisfactory safety for
the product (involve for example a danger of overheating).
14. Do not store explosive substances or products that contain propellants (for example aerosols) in the product. Thermostats
that are activated can emit sparks and pose a fire hazard. Flammable substances may explode.
15. Do not use electrical equipment in this product. Danger of sparks and explosion.
16. No not use oil or grease on the door seal, because oil and grease can damage the seal and gradually make it porous.
17. Do not block the valve openings, because it will make the product less effective, increase its power consumption and the product
may be damaged.
18. The product is intended for use within definite climate classes (ambient temperature) and ought not to be used outside such
limits. The climate class is specified on the type plate on the inside of the product and in chapter 6.
19. Do not use a steam cleaner to clean the product. Steam can penetrate between the electronic components and cause short-
circits.

3. Product information

The Norcool corner fridge is available in these models; for integration, for integration with stainless steel door and a freestanding model
in all stainless steel.
They are designed for chilling food for use in private households. These User instructions are general, and apply to all models.
The corner fridge units require a power supply of 220-240VAC 50 Hz and must be connected to an earthed min. 10A mains socket.
The mains socket must be easily available. Corner fridge units have a capacity of 1161 litres and have 3m2 shelf area without boxes.
The maximum allowable load on door hinges (including furniture front and goods) is 45kg. Weight of complete cold room door is
15kg. We thus recommend that heavy products are not placed in the door. Use the shelves or floor.
Always ensure there is sufficient air circulation above and under the fridge (all models). Freestanding corner fridges must have a gap of
minimum 130mm from top of the cabinet to the kitchen ceiling, and 25mm from bottom of the cabinet to the kitchen floor. If the corner
fridge is to be integrated in a floor to ceiling kitchen, ensure sufficient air circulation above and under the corner fridge by fitting an air
grille in the plinth and above the door, plus an air duct. See fig. 1. When integrating, air grilles must always be used. Select right- or
left hinging of doors when installing.
Room temperature where a corner fridge is installed must always be between 16 - 38° C.
A practical equipment is also offered pack to help you keep good order and organise the inside of the fridge. This consists of a wine
shelf, bottle rack for 16 x 1.5 litre bottles and a practical basket for smaller dressing bottles.