System Event Log - Avalue Technology HPM-246 User Manual

Power Control Policy
3.6.4.1

System Event Log

Item
SEL Components
Erase SEL
When SEL is Full
Log EFI Status Codes
Do Not PowerUp
Last Power State
Power Restore
Unspecified[Default]
Option
Enabled[Default]
Disabled
No[Default]
Yes, On next reset
Yes, On every reset
Do Nothing[Default]
Erase Immediately
Delete Oldest Record
Disabled
Both
Error code[Default]
Progress code
the OS Boot Watchdog Timer policy.
Configure how the system should respond if AC Power
is lost, Reset not required as selected Power policy will
be set in BMC when policy is saved.
Change this to enable or disable event logging
for error/progress codes during boot.
Choose options for erasing SEL.
Choose options for reactions to a full SEL.
Disable the logging of EFI Status Codes or log
only error code or only progress code or both.
HPM-246 User's Manual 71
User's Manual
Description