Basic Display; Meaning Of The Display And Buttons - Siemens RWF40 Series User Manual

6.1 Basic display

6.1.1 Meaning of the display and buttons

30/56
The diagram shows the RWF40... after switching on power. This condition is called the
basic display. The actual value and the currently active setpoint are shown here. Manual
operation, self-setting, the user, parameter and configuration levels can be activated
from here.
Actual value
display (red)
Setpoint display
(green)
Decrease value
PGM button
CC1B7865E
Release of burner
Regulating unit CLOSE / 1st stage
Regulating unit OPEN / 2nd stage
2-stage operation
503
639
7865p02e/0200
February 10, 2000
6. Operation
Manual operation
Limit comparator
Increase value
EXIT button
Landis & Staefa Division