FUNCTION MENU SETUP
Tone Burst Frequency
This function is used for waking up sleeping repeater, it needs a certain intensity of Tone Burst to wake
up sleeping repeater. In general, as long as the repeater has been waked up, no need to transmit Tone
Pulse again in preset time.
1. After pressing
key.
2. Press
/
3. Press
key enter into next menu, LCD displays "
setting.
1750Hz, 2100Hz, 1000Hz, 1450Hz, OFF, 4 kinds of Tone Burst for optional
4. Press
key or
Battery Save
User can setup battery save ratio according to requirements. The standby time can be extended when
enable battery save function, but if save ratio setting too high, it may cause voice missing.
1. After pressing
2. Press
/
3. Press
key enter into next menu, LCD displays "
setting.
OFF: Battery Save is disabled.
43
key, the top corner of LCD displays "
key to choose menu 30 and display "TBST".
key to confirm and exit.
key, the top corner of LCD displays "
key to choose menu 31 and display "SAVE".
" icon, then press
" icon, press
/
" icon, then press
" icon, press
/
to select desired
key.
to select desired