Preparation; Installing/Removing The Battery; Installing/Removing The Antenna - Alinco DJ-CRX7 Instruction Manual

PREPARATION

Installing / Removing the Battery
■ Installing the Battery
Align the catches on the unit with the grooves on the battery
pack, slide the pack forward and close the latch until it
clicks.
■ Removing the Battery Pack
Push the latch in the direction of the arrow, and pull out the
battery pack.
Installing / Removing the Antenna
Installing the Antenna:
■
Screw the antenna into the connector on the top of the
transceiver by holding the antenna at its base and turning it
clockwise until secure.
■ Removing the Antenna:
Turn the antenna anticlockwise till the antenna separates the
connector of the transciever to remove it.
NOTE: Do not use third-party antenna as it may radiate more
RF that exceeds SAR limit guidances.
3
06