Tone Burst Frequency; Battery Save - Alinco DJ-CRX2 Instruction Manual

FUNCTION MENU SETUP

Tone Burst Frequency

This function is used for waking up sleeping repeater, it needs a certain intensity of Tone Burst to wake
up sleeping repeater. In general, as long as the repeater has been waked up, no need to transmit Tone
Pulse again in preset time.
1. After pressing
A
key.
8
SET
2. Press / key to choose menu 27 and display "TBST".
B
C
3. Press key enter into next menu, LCD displays "
A
setting.
1700Hz, 2100Hz, 1000Hz, 1450Hz, OFF, 5kinds of Tone Burst for optional
4. Press key or

Battery Save

User can setup battery save ratio according to requirements. The standby time can be extended when
enable battery save function, but if save ratio setting too high, it may cause voice missing.
1. After pressing
A
2. Press / key to choose menu 28 and display "SAVE".
B
C
3. Press key enter into next menu, LCD displays "
A
setting.
OFF: Battery Save is disabled.
41
key, the top left corner of LCD displays "
key to confirm and exit.
#
key, the top left corner of LCD displays "
" icon, then press
" icon, press /
B
C
" icon, then press
8
" icon, press /
B C
to select desired
key.
SET
to select desired