Self Id Inquiry; Tone Burst Frequency - Alinco DJ-CRX5 Instruction Manual

FUNCTION MENU SETUP

Self ID inquiry

1. After pressing
A
key.
8
SET
2. Press / key to choose menu 27 and display "ID".
B
C
3. Press key enter into next menu, LCD displays "
A
setting.
The ID code displaying on LCD is transceiver self ID code.
4. Press key or

Tone Burst Frequency

This function is used for waking up sleeping repeater, it needs a certain intensity of Tone Burst to wake
up sleeping repeater. In general, as long as the repeater has been waked up, no need to transmit Tone
Pulse again in preset time.
1. After pressing
A
key.
8
SET
2. Press / key to choose menu 28 and display "TBST".
B
C
3. Press key enter into next menu, LCD displays "
A
setting.
1700Hz, 2100Hz, 1000Hz, 1450Hz, OFF, 5kinds of Tone Burst for optional
4. Press key or
41
key, the top left corner of LCD displays "
key to confirm and exit.
#
key, the top left corner of LCD displays "
key to confirm and exit.
#
" icon, then press
" icon, press /
B
C
" icon, then press
" icon, press /
B
to select desired
to select desired
C