BASIC OPERATIONS
3. When current group displays "EMPTY", press
displays "
" icon, press and hold
enters into DTMF edit state, LCD displays "___________", now you can enter
desired DTMF data by keypad. DTMF data also can be created by PC programming.
4. When finished editing, press side key [PF2] to save DTMF signaling.
Keypad Lock
Under standby state, press
press and hold
key until a beep sounds, and LCD displays "
locked. Repeat above operation, " " icon disappears, key lock function is cancelled.
NOTE: When keypad is locked, only PTT / PF1 / PF2 /
Stopwatch Function
1. In standby state, press
into stopwatch function.
2. Press
key to start timing. Under this state, press
When timing is pause, press
3. Press [PF1], [PF2], [MONI] or
NOTE: During timing, press
clear timer. The timer only counts within 60 minutes then resets.
key until a beep sounds, and transceiver
key, the top corner of LCD displays "
key, the top corner of LCD displays "
key to continue timing.
key to exit stop watch function.
key to stop timing and displays current data, press this key again to
key, the top corner of LCD
" icon, then
" icon, keypad is
key are usable.
" icon, then press
key to pause timing.
to enter
20