Table of Contents
Advertisement
Enable watchdog
timer?
Debug/Trace
Configuration
Break processor on
write to ROM?
Trace background or
foreground
operation?
This question allows you to enable/disable the watchdog timer interrupt.
no
Disables the watchdog timer interrupt. This may
useful in early stage of your program development.
yes
Enables the watchdog timer interrupt.
The debug/trace configuration questions allows you to specify breaks
on writes to ROM, and specify that the analyzer trace
foreground/background execution, and bus release cycles. To access
the trace/debug configuration questions, you must answer "yes" to the
following question.
Modify debug/trace options?
This question allows you to specify that the emulator break to the
monitor upon attempts to write to memory space mapped as ROM.
The emulator will prevent the processor from actually writing to
memory mapped as emulation ROM; however, they cannot prevent
writes to target system RAM locations which are mapped as ROM,
even though the write to ROM break is enabled.
yes
Causes the emulator to break into the emulation
monitor whenever the user program attempts to
write to a memory region mapped as ROM.
no
The emulator will not break to the monitor upon a
write to ROM. The emulator will not modify the
memory location if it is in emulation ROM.
This question allows you to specify whether the analyzer trace only
foreground emulation processor cycles, only background cycles, or
both foreground or background cycles.
Configuring the Emulator 4-17
Advertisement
Table of Contents
