Table of Contents
Advertisement
SFR area start address?
SFR area end address?
Second SFR area start address?
Second SFR area end address?
Specify the start address and end address of internal SFR of your
processor. These addresses can be defined on 16 byte boundaries.
If your processor has only one SFR area, specify the same value as the
first one for the "Second SFR ..." questions.
Internal RAM area start address?
Internal RAM area end address?
Second internal RAM area start address?
Second internal RAM area end address?
Specify the start address and end address of internal RAM of your
processor. These addresses can be specified on 16 byte boundaries. If
your processor has no internal RAM, enter 0 as start address and end
address of internal RAM area. If your processor has only one SFR
area, specify the same value as the first one for the "Second internal
RAM ..." questions.
Internal ROM area start address?
Internal ROM area end address?
Specify the start address and end address of internal ROM of your
processor. These addresses can be defined on 16 byte boundaries. If
your processor has no internal ROM, enter 0 as start address and end
address of internal ROM area.
Processor mode register address?
Specify the address of processor mode register. This is needed to
manage processor operation modes.
Configuring the Emulator 4-7
Advertisement
Table of Contents
