Table of Contents
Advertisement
On-Line Help
Softkey Driven Help
---SYSTEM COMMANDS & COMMAND FILES---
?
help
!
!<shell command>
pwd
cd <directory>
pws
cws <SYMB>
forward <UI> "command"
--More--(15%)
2-8 Getting Started
There are two ways to access on-line help in the Softkey Interface. The
first is by using the Softkey Interface help facility. The second method
allows you to access the firmware resident Terminal Interface on-line
help information.
To access the Softkey Interface on-line help information, type either
"help" or "?" on the command line; you will notice a new set of
softkeys. By pressing one of these softkeys and <RETURN>, you can
cause information on that topic to be displayed on your screen. For
example, you can enter the following command to access "system
command" help information.
? system_commands <RETURN>
displays the possible help files
displays the possible help files
fork a shell (specified by
fork a shell and execute a shell command
print the working directory
change the working directory
print the default symbol scope
change the working symbol - the working symbol also
gets updated when displaying local symbols and
displaying memory mnemonic
send the command in the quoted string from this user
interface to another one.
of the other user interface as shown on the softkeys:
The help information is scrolled on to the screen. If there is more than
a screenful of information, you will have to press the space bar to see
the next screenful, or the <RETURN> key to see the next line, just as
you do with the HP-UX more command. After all the information on
the particular topic has been displayed (or after you press "q" to quit
scrolling through information), you are prompted to press <RETURN>
to return to the Softkey Interface.
shell variable SH)
Replace <UI> with the name
Advertisement
Table of Contents
