Respond To Target System Interrupts; Enable Watchdog Timer - HP 7700 Series User Manual

Respond to target
system interrupts?
Note
Enable watchdog
timer?
system memory locations, the monitor will either use byte or word
instructions to accomplish the read/write.
byte Specifies that the emulator will access target system
memory by byte accesses.
word Specifies that the emulator will access target system
memory by word accesses.
This configuration allows you to specify whether or not the emulator
responds to interrupt signals from the target system during foreground
operation.
yes The emulator will respond to interrupt signals from
the target system.
no The emulator will not respond to interrupt signals
from the target system.
You may need to set up switches inside the emulation pod to accept
interrupts from the target system. Refer to the manual provided with
your emulation pod.
This question allows you to enable/disable the watchdog timer interrupt.
no Disables the watchdog timer interrupt. This may
useful in early stage of your program development.
yes Enables the watchdog timer interrupt.
Configuring the Emulator 4-17