Table of Contents
Advertisement
Monitor type? foreground
Specifies that you will be using a foreground monitor program.
Reset map (change of monitor type requires map reset)?
yes
You must answer this question as shown to change the monitor type to
foreground.
Monitor address? 0b800h
Specifies that the monitor will reside in the 2K byte block from b800
hex through bfff hex.
Monitor file name? fm7750
Enter the name of the foreground monitor absolute file. This file will
be loaded at the end of configuration.
Mapping Memory for the Example
When you specify a foreground monitor and enter the monitor address,
all existing memory mapper terms are deleted and a term for the
monitor block will be added. Add the additional term to map memory
for the sample program and, map other area as target RAM.
400h thru 5ffh emulation ram <RETURN>
0c000h thru 0ffffh emulation ram <RETURN>
default target ram <RETURN>
end <RETURN>
If your processor has no internal RAM, map 0 hex through 2ff hex as
emulation RAM.
See the "Mapping Memory" section of the "Configuring the Emulator"
chapter for more information.
Configuration file name? fmconfig
If you wish to save the configuration specified above, answer this
question as shown.
Using A Foreground Monitor A-5
Advertisement
Table of Contents
