IBM ServeRAID-4 Ultra160 Series User Reference page 48

Figure 8. Configuration mode window
30
®
IBM User's Reference: ServeRAID
Note: (UnixWare only) When installed on UnixWare, the ServeRAID
Manager program might list the installed ServeRAID controllers in a
different order than the ServeRAID Manager program in startable-CD
mode. To identify a specific controller, refer to its physical slot number.
Follow the instructions in the right panel to create logical drives on your
ServeRAID controller. If you do not want to configure your ServeRAID
controller, click Cancel. This will switch the program from Configuration mode
to Information mode.
v If the ServeRAID Manager program detects that all ServeRAID controllers in
the server are configured, the program starts in Information mode and a
window similar to the following opens.
™
-4 Ultra160 SCSI Controller