Chapter 15. Monitoring And Updating An Ibm Serveraid Cluster Solution; Checking The Ownership Of A Physical Drive - IBM ServeRAID-4 Ultra160 Series User Reference

Chapter 15. Monitoring and updating an IBM ServeRAID
Cluster Solution
You can use the ServeRAID Manager program to check the ownership of a physical
drive on another server or to add or remove a logical drive in the cluster. The
ServeRAID Manager program supports three features for cluster functions:
v View shared drives
v Validate cluster
v Configure for clustering
Note: Make sure that you installed the ServeRAID Manager program on your

Checking the ownership of a physical drive

A physical drive that is owned (and configured) on Server B will appear in the ready
or defunct state on Server A. To determine if a ready drive is owned by the other
server, do the following:
1. In the Main Tree, click the controller that contains the ready drives. A window
Figure 29. Information mode window
© Copyright IBM Corp. 2001
server. If you need to install it, refer to "Installing the ServeRAID Manager
program" on page 81 for instructions.
similar to the following opens.
123