Motomaster 011-1962-8 Instruction Manual page 6

Simple series onboard battery charger
Table of Contents

Advertisement

6
headline bars
model no. 011-1962-8 | contact us 1-888-942-6686
Use charger for charging a LEAD-ACID battery only. It is not intended to
supply power to a low-voltage electrical system other than in a starter-
tabs
motor application. Do not use battery charger for charging dry-cell batteries
that are commonly used with home appliances. These batteries may burst
and cause injury to persons and damage to property.
NEVER charge a frozen battery.
continuation tabs
AC ELECTRICAL CONNECTIONS
PLUGGING CHARGER IN
Your charger requires a 120 V AC electrical wall outlet receptacle installed
according to local codes and ordinances.
notes
USING AN EXTENSION CORD
An extension cord should not be used unless absolutely necessary. Use of
improper extension cord could result in a risk of fire and electric shock. If an
extension cord must be used, make sure:
The pins on plug of extension cord are the same number, size, and shape
as those of plug on charger.
warnings
The extension cord is properly wired and in good electrical condition.
The wire size is large enough for AC ampere rating of charger as
specified in the chart below:
MINIMUM RECOMMENDED EXTENSION CORD
Length of Cord, Metres (Feet) AWG* Size of Cord
7.6 (25)
15.2 (50)
30.5 (100)
45.6 (150)
*AWG = American Wire Gauge
18
18
18
16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents