Table of Contents
Advertisement
PROBLEM
Red LED is flashing. • Ring terminals are
Battery ring
terminals do
not spark when
touched together.
Both LEDs come
on for 2 seconds,
then turn off.
I cannot select a
6 V or 12 V setting.
NOTE:
For more information about troubleshooting or replacement parts, call toll-free: 1-888-942-6686.
POSSIBLE CAUSE
connected in reverse.
• Desulfation failed.
• Maintain current is too
high. (May be caused
by battery problem, or
the battery is charging
and discharging at the
same time.)
The charger is equipped
with an auto-start feature.
It will not supply current to
the battery ring terminals
until a battery is properly
connected. The ring
terminals will not spark if
touched together.
The charger is plugged
into an AC outlet.
The charger is equipped
with Auto Voltage Detection,
which automatically
detects the voltage and
charges the battery.
s
a r
b
e
SOLUTION
• Reverse the connection
of the ring terminals.
• Have the battery
checked.
b s
t a
n
o
t i
u a
• Do not charge and
discharge battery at
the same time. Have
battery checked.
No problem; this is a
normal condition.
g s
No problem; this is
normal.
No problem; this is
normal.
17
n
d l i
e a
h
b s
t a
i n
n t
c o
e s
o t
n
n
n i
a r
w
Hide quick links:
Advertisement
Table of Contents
