Maintain Mode (Float Mode Monitoring); Maintaining A Battery - Motomaster 011-1962-8 Instruction Manual

14
headline bars
model no. 011-1962-8 | contact us 1-888-942-6686
MAINTENANCE MODE (FLOAT MODE MONITORING)
When the Green LED is lit, the charger has completed charging and started
tabs
maintenance mode. In this mode, the charger keeps the battery fully charged
by delivering a small current when necessary. If the charger has to provide its
maximum maintain current for a continuous 12 hour period, it will go into abort
mode. This is usually caused by a drain on the battery or the battery could be
continuation tabs
bad. Make sure there are no loads on the battery. If there are, remove them.
If there are none, have the battery checked or replaced (if necessary).

MAINTAINING A BATTERY

This product maintains both 6 V and 12 V batteries, keeping them at full
notes
charge. It is not recommended for industrial applications. The maintain mode
technology allows you to safely charge and maintain a healthy battery for
extended periods of time. However, problems with the battery, electrical
problems in the vehicle, improper connections or other unanticipated
conditions could cause excessive current draws. As such, occasionally
monitoring your battery and the charging process is required.
warnings