Safety - Motomaster 011-1962-8 Instruction Manual

4
headline bars
model no. 011-1962-8 | contact us 1-888-942-6686
INTRODUCTION
The MotoMaster
tabs
microprocessor technology making battery charging faster, easier, and safer
than ever before. This manual will explain how to use the charger safely and
effectively. Please read and follow these instructions and precautions carefully.
IMPORTANT SAFETY INSTRUCTIONS
continuation tabs
SAVE THESE INSTRUCTIONS.
Read all instructions, warnings, and cautions printed on the battery
•
charger, battery and vehicle or equipment using battery.
DO NOT expose charger to rain or snow.
• notes
Use of an attachment not recommended or sold by the battery charger
•
manufacturer may result in a risk of fire, electric shock, or injury to persons.
To reduce risk of damage to electric plug and cord, pull by plug rather
•
than cord when disconnecting charger.
• An extension cord should not be used unless absolutely necessary.
Use of improper extension cord could result in a risk of fire and electric
shock. If an extension cord must be used, make sure:
warnings
The pins on plug of extension cord are the same number, size, and
•
shape as those of plug on charger.
The extension cord is properly wired and in good electrical condition.
•
The wire size is large enough for the AC ampere rating of the
•
charger, as specified in the chart on the following page.
DO NOT operate charger with damaged cord or plug – replace the cord
•
or plug immediately.
DO NOT operate charger if it has received a sharp blow, been dropped, or
•
otherwise damaged in any way; take it to a qualified service professional.
DO NOT disassemble the charger. Take it to a qualified service
•
professional if service or repair is required. Incorrect assembly may
result in fire or electrical shock.
Simple Series Onboard Battery Charger features advanced
®