Status Leds (Led1-8); Power Led (Led9); Done Led (Led10) - Analog Devices Blackfin FPGA EZ-Extender Manual

Status LEDs (LED1–8)
Eight status LEDs,
any application that requires it.
connections.
Table 2-15. Status LED (LED1–8) Settings
Reference Designator
LED1
LED2
LED3
LED4
LED5
LED6
LED7
LED8

Power LED (LED9)

The power LED,
signifies that the FPGA EZ-Extender is powered properly.

Done LED (LED10)

The done LED,
power-up, the FPGA is blank and needs to be programmed. When lit, the
LED indicates that the FPGA is programmed successfully.
Blackfin FPGA EZ-Extender Manual
FPGA EZ-Extender Hardware Reference
, connect to the FPGA and act as status flags in
LED1–8
Table 2-15
FPGA Pin Number
U11
W11
AB10
Y10
AB9
W9
AB8
V10
, connects to the 2.5V power supply and, when lit,
LED9
, connects to the done pin of the FPGA. At
LED10
shows the LED/FPGA
2-17