Analog Devices Blackfin FPGA EZ-Extender Manual page 21

FPGA EZ-Extender Interfaces
The third and final way to program the FPGA is via the Xilinx serial
ROM on the FPGA EZ-Extender. The serial ROM used for FPGA is
shipped with the extender and is pre-programmed. If the serial ROM
needs to be re-programmed with new code, use an Xilinx JTAG cable and
software and connect the Xilinx JTAG cable to the flash JTAG header
( ).
P6
More information about programming the serial ROM can be found at
. More details about the different ways to program the
www.xilinx.com
FPGA can be found in "FPGA EZ-Extender Hardware Reference" on
page 2-1.
Blackfin FPGA EZ-Extender Manual 1-5