How To Operate - Homecraft HCPBMAD2WH Instruction Manual

KEEP WARM
Bread will be automatically kept warm for 60 minutes after baking.
If you would like to take the bread out at any time after the program
ends, switch the program off with the START/STOP button.
AUTOMATIC DISPENSER FUNCTION
Put the fruit or nut into ingredient pan before you start
the program. When making bread, the program will put
the ingredients in the bread bucket automatically.
MEMORY
If the power supply is interrupted during the course
of the bread making, the bread making process will
be continued automatically within 10 minutes, even
without pressing the START/STOP button. If the break
time exceeds 10 minutes, the memory will not save and the bread maker must be
restarted. If the dough is no further than the kneading phase when the power supply
breaks off, press the START/STOP button to restart the program from the beginning.

HOW TO OPERATE

Before first use:
1. Unpack ELECTRIC BREAD MAKER and check to make sure that all
parts and accessories are included and undamaged.
2. Clean all the parts according to the CLEANING AND MAINTENANCE section.
3. Set the bread maker on BAKE mode and bake empty for about 10 minutes.
Then let it cool down and clean all the detached parts again.
4. Dry all parts thoroughly and assemble them. The appliance is now ready for use.
How to make bread:
1. Place the Bread Pan inside the Main Unit, and then turn it clockwise until it clicks into the
correct position. Fix the Kneading Blade onto the drive shaft. It is recommended to fill the hole
with margarine prior to putting the Kneading Blade on in order to avoid the dough sticking to
the Kneading Blade. This will also make the Kneading Blade easier to remove for cleaning.
2. Place ingredients into the Bread Pan. Add water or liquid ingredients first, then add
sugar, salt and flour. NOTE: Always add yeast or baking powder as the last ingredient.
3. Make a small indentation on the top of flour with your finger, add yeast into the
indentation, making sure it does not come into contact with the liquid or salt.
4. Close the Lid gently and plug the power cord into a wall outlet.
5. Press the MENU button until your desired program is selected.
6. Press the COLOR button to select the desired crust color.
9
Yeast or Soda
Dry Ingredients
Water or Liquid