Programming The Dect Parameters - Aastra X series Installation And Implementation Manual

13.3 Programming the DECT parameters

For the NeXspan C/S/L range, menu 1.8.1.2 (single-company management) or 1.9.1.2 (multi-
company management) is used to program the DECT parameters:
The first four fields as well as the last two are described in the section "Paramètres DECT" à la
page 171. The following parameters are specific to a multisite configuration and are used to
define the list of sites on which the mobile terminals will be registered:
• SEARCH MOBILES NOT REGISTERED: fill in the field "OR IN THE LIST" with a broadcast
list (broadcast list A is the default).
Program the menu 3.7.2.5 with a list of the remote sites or centres.
DEFINING LIST BROADCAST A
AMT/PTD/TR/0020/2/7/EN
DECT PARAMETERS
PARI VALUE 0
RANDOM VAL RECORDED
RS VAL RECORDED
DIR. BEGINNING ASSIGNED TO PLL
SEARCH MOBILES NOT REGISTERED
IN THE LOCAL SITE
OR IN ANOTHER SITE
OR IN THE LOCAL CENTER
OR IN ANOTHER CENTER
OR IN THE LIST
CLOCK SYNCHRO
CURRENT STATE
TRANSMITTER
ITEM 1: CENTER NAME
OR SITE NAME
OR OTHER LIST
ITEM 2: CENTER NAME
OR SITE NAME
OR OTHER LIST
ITEM 3: CENTER NAME
OR SITE NAME
OR OTHER LIST
ITEM 4: CENTER NAME
SITE NAME
OR OTHER LIST
86........
66........
........
........
BROADCAST A
PRIORITY MASTER
NETWORK CLOCK
01-CENTER 1
........
........
02-CENTER 2
........
........
03-CENTER 3
........
........
........
........
........
10/2008
999999999.
999.
NO
NO
Page 13-212