Chapter 8: Multi-site synchronisation
This chapter describes the principles and specific features of synchronisation for multi-site
networks.
Chapter 9: Checking the installation
Describes the preliminary operations common to NeXspan C/S/L/D, NeXspan 50 and NeXspan
500 devices before programming and implementing the DECT installation.
Chapter 10: Programming for NeXspan C/S/L/D PBXs
This chapter describes the programming steps to put in service the integrated DECT service for
NeXspan C/S/L/D PBXs.
Chapter 11: Programming for NeXspan 50/NeXspan 500 PBXs
This chapter describes the programming steps to put in service the integrated DECT service for
NeXspan 50 and NeXspan 500 PBXs.
Chapter 12: Programming for Aastra X series PBXs
Describes the programming steps to implement the integrated DECT service for AXD, AXL, AXS,
AXS12 and AXS6 PBXs.
Chapter 13: Multi-site programming
This chapter describes the specific programming steps to put in service the integrated DECT
service for a multi-site network.
1.2
Audience
This document is for installers whose tasks are to:
•
Carry out a study into positioning base stations, and system traffic flow
•
connect base stations to the distribution frame,
•
Start up the IP DECT system and put it into service.
1.3
Reference documents
Standards related documents
DECT standards (ETSI standards):
•
ETS 300-175: Digital European Cordless Telephone Common Interface
•
ETS 300-176: Digital European Cordless Telephone approval test specification
•
ETS 300-444: Digital European Cordless Telephone General Access Profile
Electromagnetic compatibility:
System components comply with the following safety and electromagnetic compatibility
recommendations:
•
ETS 300-329 : Radio Equipment Systems; Electromagnetic Compatibility for Digital
Enhanced Cordless Telephone.
•
EN 60950 :Security of data processing equipment
•
EN 50081-1 : Electromagnetic Compatibility - Transmission.
Page 1-13
10/2008
AMT/PTD/TR/0020/2/7/EN