Declare The Base Stations - Aastra X series Installation And Implementation Manual

Cordless telephony nexspan range
Hide thumbs Also See for X series:
Table of Contents

Advertisement

11.10 Declare the base stations

The MMC XBORFA, Object "RadSta", is used to declare the base stations.
The fields "TS Frame assignment" and "Freq. assignment" must not be changed (both at 1).
The field "Anten. choice" must be "Automatic" if the base station has no external antenna.
The field "Inscript. Radio Stat." must be at "yes" when the system starts up. It must be set to
"no" if there are no mobiles to be registered.
The field "Type of RadSt" must be set to BIT_M if you are working with 2 pairs (one transmit
pair and one receive pair).
A base station must be declared 4-channel.
Obj.=RadSta
------------------------------- RADIO STATIONS ACCESS --------------------------
CCU=3.
------------------------------- CHARACTERISTICS --------------------------
Radst=4-chan
Trunk Gp=0.
TS Frame assignment=111111111111
Anten. choice= Automatic
Type of RadSt= BIT_M
Software variant=24
You can check that the base stations have been put in service via the MMC XBORFA, object
"RadSta", action "Display", RadStations Access mode "Trunk Grp".
TRUNK GROUP AND TRUNKS
Obj.=RadSta
------------------------------ TRUNK GROUP ACCESS --------------------------
CCU=3.
------------------------------- LIST OF RADIO BASE STATIONS ---------------------
-----
Board type=LAS/LDS
Nr=2. Access=1. Record=YES
Status=FREE
Bus=Short
Nr=.. Access=.. Record=NO
Status=---
Bus=Short
Nr=.. Access=.. Record=NO
Status=---
Bus=Short
Nr=.. Access=.. Record=NO
Status=---
Bus=Short
Press RETURN to go to next page
-------------------------- THE BALANCE OF RADIO STATIONS STATUS -----------------
----
Nbr. of RadStation=1..
AMT/PTD/TR/0020/2/7/EN
TRUNK GROUP AND TRUNKS
Board type=LDS
Access status=IN SERVICE
11--------->0
TS frame=111111111111
Type=External Anten. choice=Automatic
Software variant=24
TS frame=000000000000
Type=Slave Anten. choice=Automatic
Software variant=..
TS frame=000000000000
Type=Slave Anten. choice=Automatic
Software variant=..
TS frame=000000000000
Type=Slave Anten. choice=Automatic
Software variant=..
Free=1..
Loading=0..
10/2008
Action=Display
RadStations Access mode=BOARD
Number=2
Freq. assignment=1111111111
Inscript. Radio Stat.=YES
Distance master RadSt=0 to 100m
Action=Display
RadStations Access mode=TRUNK GRP
Trunk Gp=0.
Frequenc.=1111111111
Dist.Mast.RS=0 to 100m
RadSt=LDS 2 chan.
Frequenc.=0000000000
Dist.Mast.RS=0 to 100m
RadSt=???
Frequenc.=0000000000
Dist.Mast.RS=0 to 100m
RadSt=???
Frequenc.=0000000000
Dist.Mast.RS=0 to 100m
RadSt=???
Page No=1
Number of pages=1
Busy=0..
Acces.=1.
Bus=short
9------->0
Out of serv.=0..
Page 11-196

Advertisement

Table of Contents
loading

Table of Contents