Allocating Base Stations - Aastra X series Installation And Implementation Manual

12.3.3

Allocating base stations

This screen is accessible via NETWORK AND LINKS / Equipment / DECT management .
This screen is used to select a base station based on different criteria.
Note: to declare a DECT trunk group in a cell, all base stations in the cell must be out of
service. The number of base stations in a cell must never exceed 8.
BY EQUIPMENT NUMBER
Selecting a DECT base station by equipment number: rack number, card number, circuit number
OR BY ITS TRUNK GROUP
Searching for a DECT base station by selecting the right trunk group
OR BY ITS CELL
Searching for a DECT base station by selecting the right trunk cell
Define the parameters then click Select item to move to the next screen.
This screen is used to configure the characteristics of a DECT base station.
STATUS
This parameter indicates the current state of the base station.
RAD.BASE TYPE
Page 12-203 10/2008 AMT/PTD/TR/0020/2/7/EN