Resources; Naming The Trunk Groups; Defining A Trunk Group - Aastra X series Installation And Implementation Manual

12.3 Resources

12.3.1 Naming the trunk groups

This screen is accessible via NETWORK AND LINKS / Equipment / DECT management.
One trunk group must be associated with one cell only. One cell contains from 1 to 8 base
stations.
This screen is used to display the names of declared trunk groups and to create new trunk
groups.
Cells are associated with trunk groups in two phases:
• The first involves naming the trunk groups; these names are chosen by the system installer.
• The second phase involves associating the previously defined trunk groups with the cells
declared in the topology menu.
The above two operations allow you link a trunk group index to the cell.

12.3.2 Defining a trunk group

This menu is used to associate a trunk group with a (previously declared) cell.
This screen is accessible via NETWORK AND LINKS / Equipment / DECT management .
This screen is used to select the trunk group to be defined.
Select the trunk group then click Select item to move to the next screen.
This screen is used to define a trunk group by associating with a given cell.
AMT/PTD/TR/0020/2/7/EN 10/2008 Page 12-202