Table of Contents
Advertisement
1.4
Installation
This package includes the firmware for the MB1355C board and the Android™ executable (APK) to be used on
Android™ smartphones.
1.4.1
MB1355C board installation
To program the MB1355C board, perform following steps:
1.
Install the ST-LINK USB driver, available on
2.
Connect the MB1355C board to a PC with the ST-Link USB-micro
3.
The MB1355C board icon appears in the computer directory
4.
Drag-and-drop the firmware to the MB1355C board icon
5.
Restart the MB1355C board
UM2710 - Rev 1
Figure 3.
X-NUCLEO-NFC04A1 board
www.st.com
UM2710
Installation
page 4/16
Advertisement
Table of Contents
Need help?
Do you have a question about the ST25DV-I2C and is the answer not in the manual?
Questions and answers