Mode Select - Polypipe SmartStat Manual

Mode Select

SmartStat can either be used as a thermostat or a time clock.
Thermostat mode is the default setting.
To change between thermostat or time clock modes, follow these steps.
• Use the Left / Right keys to scroll to
• Press and hold the Tick button for 3 seconds ...............................................................
• SETUP will be highlighted, now press and hold the tick key for 10 seconds .....
• Use the Left / Right keys to scroll between modes .....................................................
Mode 1 = Thermostat
Mode 2 = Time Clock
• Press the Tick key to con rm selection ............................................................................
The SmartStat will revert to the main display screen for the selected mode.
For time clock mode instructions, rst pair the time clock with the SmartHub as
explained on page 8, then turn to page 33.
7
...........................................................................
Smart Series