Floor Temperature Sensor Probe Type
The SmartStat is configured as default for compatibility with 10K sensor probes.
The thermostat is also compatible with two other common probe values which are 12K or 15K.
To change the neoStat to use a di erent probe type, follow these steps;
•
Use the Left / Right keys to scroll to
•
Press and hold Tick to turn the display OFF .........................................................
•
Press and hold the Up and Down keys together for 5 seconds ................
•
Use the Left / Right keys to scroll between the di erent probe values ......
10 = 10K Probe
• Press the Tick key to con rm selection .....................................................................
The SmarStat will revert to the main display configured for the new probe type.
Note: This change should only be carried out by an experienced technician who has
accurately veri ed the probe value being used.
......................................................
12 = 12K Probe
SmartStat
15 = 15K Probe
28
Need help?
Do you have a question about the SmartStat and is the answer not in the manual?