Table of Contents
Advertisement
Mode Select
UFHPROGW can either be used as a thermostat or a time clock. Thermostat mode
is the default setting.
To change between thermostat & time clock modes, follow these steps.
• Use the 'Left/Right' arrow keys to highlight
the button for 3 seconds ..........................................................................................
At this point the screen will go blank showing only 'SETUP' and 'CLOCK' .
• Tap either of the 'Up' or 'Down' arrow keys to highlight 'SETUP' , then hold
the
key for 10 seconds ...............................................................................................
The UHFPROGW will factory reset then provide 2 selectable mode options.
• Use the Left / Right keys to scroll between modes ...........................................
Mode 1 = Thermostat
Mode 2 = Time Clock
Note: the selected option will ash.
• Press the
key to con rm selection ........................................................................
The UFHPROGW will reset all parameters and restart in the selected mode.
Note: The Mode Select function will reset all parameters that were entered
during the set-up operations. These processes must be repeated after the
restart has completed.
7
then press and hold
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the UFHPROGW and is the answer not in the manual?
Questions and answers
One of my wall thermostats is stuck. Won't edit. Has hand with finger pointing up
The Polypipe UFHPROGW thermostat may be locked if it shows a hand with a finger pointing up. To fix this, try the following steps:
1. Press and hold the Left/Right keys to navigate to the Power Icon.
2. Press and hold the button to turn the display OFF.
3. Press and hold the Down key together with the other relevant key for 10 seconds.
4. The current temperature should appear on the display.
5. If editable, use the Up/Down keys to adjust the settings.
6. Press the confirm button to save changes, and the display should go blank.
If the thermostat remains unresponsive, check the installation and wiring, ensuring it complies with the provided wiring diagrams.
This answer is automatically generated