Setting The Switching Times - Polypipe SmartStat Manual

Setting the Switching Times

To program the switching times, follow these steps.
• Use the Left / Right keys to scroll to EDIT and press Tick .................................
• Use the Left / Right keys to select day/period of the week .............................
• Press Tick to con rm selection ...................................................................................
1 will now ash and the current ON time will be displayed.
The OFF time can be viewed by pressing the Down key .................................
• Select a switching time and press the Tick key ....................................................
• Use the Up / Down keys to select the ON time HOURS and press Tick .......
• Use the Up / Down keys to select the ON time MINUTES ................................
• Press Tick to con rm selection ..................................................................................
• Use the Up / Down keys to select the OFF time HOURS and press Tick .....
• Use the Up / Down keys to select the OFF time MINUTES ..............................
• Press Tick to con rm selection ..................................................................................
• Press the Right arrow key ............................................................................................
2 will now ash and the current ON time will be displayed.
• Repeat the steps above to set all periods. For any unused periods enter -- : -
• When complete, use the Left / Right keys to scroll to DONE and press
Tick to con rm all changes ........................................................................................
SmartStat
36