Locking/Unlocking The Neostat - Polypipe SmartStat Manual

Locking the Display
The SmartStat has a keypad lock facility. To activate the lock follow these steps.
• Use the 'Left/Right' keys to scroll to 'HOLD' & press
The display will show 0000. At this point enter a four digit pin number.
• Use the Up / Down keys to enter the rst two digits ........................................
• Press to con rm .................................................................................................................
• Use the Up / Down keys to enter the second two digits .................................
• Press to con rm .................................................................................................................
The display will return to the main screen and display the keypad lock indicator ......
Note: The keypad lock indicator is only displayed when the lock is active.
Unlocking the Display
To unlock the SmartStat press Tick once. The display will show 00:00 and you will
need to enter the four digit pin number you set previously.
• Use the Up / Down and
• Use the Up / Down and
The display will unlock and return to the main screen.
19
keys to enter the rst two digits ...........................
keys to enter the second two digits ...................
Smart Series
for 10 seconds ........