Table of Contents
Advertisement
Setting the Switching Times
To program the switching times, follow these steps.
• Use the 'Left/Right' keys to scroll to 'EDIT' ............................................................
• Press
to con rm selection .............................................................................................
• Use the 'Left/Right' keys to select the day/period to program ....................
• Press
to con rm selection .............................................................................................
• Level '1' will now ash and the 'ON' time will be displayed.
• Press
to alter Level '1' ......................................................................................................
• To set the 'ON' time, use the 'Up/Down' keys to set the hours,
followed by
• Press
to con rm ...............................................................................................................
• To set the 'OFF' time, use the 'Up/Down' keys to set the hours,
followed by
, then use 'Up/Down' to set the minutes ............
• Press
to con rm the settings .......................................................................................
• Press the 'Right' arrow key ..................................................................................................
• Level '2' will now ash and the current settings will be displayed.
• Press
to alter Level '2' settings .....................................................................................
• Repeat these steps to set all periods.
• To blank or set a switching level period to unused, rst select the switching level
then set --:-- in place of the time.
• When all switching times have been programmed use the 'Right' arrow
key to select 'DONE' and press
, then use 'Up/Down' to set the minutes ...........
.............................................................................
Model: UFHPROGW
32
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the UFHPROGW and is the answer not in the manual?
Questions and answers
One of my wall thermostats is stuck. Won't edit. Has hand with finger pointing up
The Polypipe UFHPROGW thermostat may be locked if it shows a hand with a finger pointing up. To fix this, try the following steps:
1. Press and hold the Left/Right keys to navigate to the Power Icon.
2. Press and hold the button to turn the display OFF.
3. Press and hold the Down key together with the other relevant key for 10 seconds.
4. The current temperature should appear on the display.
5. If editable, use the Up/Down keys to adjust the settings.
6. Press the confirm button to save changes, and the display should go blank.
If the thermostat remains unresponsive, check the installation and wiring, ensuring it complies with the provided wiring diagrams.
This answer is automatically generated