Battery Warnings For Active Version - Simons Voss Technologies Padlock Manual

Padlock (Manual)

7 Battery warnings for active version

1. Place the installation/battery key on the knob in such a way that its two
teeth lock into the openings in the locking disc; If necessary, turn the
knob until both teeth engage into the knob. Important: the battery/in-
stallation key must be placed flat on the inside front surface of the re-
cessed grip ring to ensure that the installation tool can engage into the
locking disc.
2. Hold the knob firmly and carefully turn the battery/installation key
about 30° in a clockwise direction (until you hear a click).
3. Remove battery/installation key from the knob.
4. Push recessed grip ring backwards towards the padlock, so that it
comes away from the thumb-turn.
5. Hold recessed grip ring, turn knob about 10° in an anti-clockwise direc-
tion and remove.
6. Carefully remove both batteries from the holder.
7. Insert the new batteries into the holder at the same time with the posit-
ive poles next to each other; change the batteries as quickly as possible.
Use clean gloves free of fat or grease to handle new batteries.
8. Replace the knob (align the triangle marks as in the diagram) and turn
about 10° in a clockwise direction.
9. Push recessed grip ring back onto the knob, so that the knob and ring
close together in a flush fit.
10. Place the installation/battery key on the knob in such a way that its two
teeth lock into the openings in the locking disc; If necessary, turn the
knob until both teeth engage into the knob.
11. Lock the knob into place again by turning it about 30° in an anti-clock-
wise direction (until you hear a click).
7. Battery warnings for active version
11 / 24