Page 1
TOWER UNIT 2070 & 2250 Diag Corner Larder with Wine Rack Cabinet Assembly Guide 2070 x 600 2250 x 600 Tall 70/30 Door 50/50 Door 1 Door Page 1 For Internal Use: FI.WR.INS.097_WKIN00199_TOWER45WineRack_Assembly_Rev8.indd...
Page 2
TOWER UNIT BEFORE YOU START 2070 & 2250 INSTALLATION Diag Corner Larder SHOULD BE PERFORMED BY A with Wine Rack Cabinet COMPETENT PERSON ONLY. Assembly Guide THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED OPTION 70/30 OPTION 50/50 OPTION Panel C...
Page 3
TOWER UNIT Step 1. Lay both carcases (LH) & (RH) flat as shown. 2070 & 2250 Secure 5 x fixing plate (U) positioned onto outside Diag Corner Larder face of panel (B) of carcase (RH) equally spaced with Wine Rack Cabinet using 2 x 15mm screws (L) as shown.
Page 4
TOWER UNIT 2070 & 2250 Diag Corner Larder Step 3. with Wine Rack Cabinet Secure leg base into place with 2 x 15mm screws (L) per leg as shown. Assembly Guide Ensure legs are rotated to also provide support to the end panels (B).
Page 5
TOWER UNIT TOWER UNIT Step 6. 2070 & 2250 Position carcase LH and carcase RH together as shown. Diag Corner Larder 2070 & 2250 with Wine Rack Cabinet Diag Corner Larder Ensure carcases are flush & square. with Wine Rack Cabinet...
Page 6
TOWER UNIT Step 9. 2070 & 2250 Use 2 x 15mm screws (L) to secure each of the Diag Corner Larder 4 x L brackets (LGE) to both carcases positioned as shown. with Wine Rack Cabinet Assembly Guide Front Front Step 10.
Page 7
TOWER UNIT TOWER UNIT Step 11. When combined cabinet is secured in position, attach top Panel (C), 2070 & 2250 2070 & 2250 Diag Corner Larder Diag Corner Larder using 4x fixing plates (U) combined with 4 x 15mm screws (L) per plate,...
Page 8
TOWER UNIT Step 14. Attach hinge plates onto end panels (B) to suit as 2070 shown using 2 x 15mm screws (L) included per plate. Diag Corner Larder with Wine Rack Cabinet Hinge side to be mounted in accordance to customer kitchen plan.
Page 9
TOWER UNIT TOWER UNIT Step 14. Attach hinge plates onto end panels (B) to suit as 2070 & 2250 2250 shown using 2 x 15mm screws (L) included per plate. Diag Corner Larder Diag Corner Larder with Wine Rack Cabinet...
Page 10
TOWER UNIT Step 14. Attach hinge plates onto end panels (B) to suit as 2250 shown using 2 x 15mm screws (L) included per plate. Diag Corner Larder with Wine Rack Cabinet Hinge side to be mounted in accordance to customer kitchen plan.
Page 11
INFINITY PLUS TOWER UNIT TOWER UNIT See Customer Specific Kitchen Plan For Tower Frontals 2070 & 2250 2070 & 2250 Diag Corner Larder Diag Corner Larder with Wine Rack Cabinet with Wine Rack Cabinet Step 15. Assembly Guide Assembly Guide Insert hinge where required in holes as shown.
Page 12
TOWER UNIT INFINITY 2070 & 2250 Diag Corner Larder with Wine Rack Cabinet Assembly Guide Step 15. Insert hinge into hinge holes provided. Step 16. Secure hinges with the 2 x screws. Step 17. Attach the door to unit, clip hinge onto hinge plate and click to secure.
Need help?
Do you have a question about the 2070 and is the answer not in the manual?
Questions and answers
Yes sizes width
The available width sizes for the Wren 2070 Tower Unit are 600mm.
This answer is automatically generated
Dimensions for corner tall larder unit double doors
The dimensions of the Wren 2070 corner tall larder unit double doors are:
- Height: 2070mm
- Width: 600mm
This answer is automatically generated