Subscribe to Our Youtube Channel
Related Manuals for Wren TOWER UNIT
Summary of Contents for Wren TOWER UNIT
- Page 1 TOWER UNIT 600 Feature Units Open Shelf Wine Rack Plate Rack Assembly Guide Built-in 2070 x 600 Built-in 2250 x 600 Tall For Internal Use: FI.WR.INS.093_WKIN00220_TOWER_Feature_Aperture_Assembly_Rev1.indd...
-
Page 2: Assembly Guide
THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Prior to installation, fixtures including doors, drawers and loose shelves should be removed to ensure a safe installation. Use Wren provided DoorSafe for temporary storage. DoorSafe Top Unit (C) Size example ONLY Supplied with:... - Page 3 TOWER UNIT Step 1. 600 Feature Units Secure each of the legs into place onto base unit (A) with Open Shelf 2 x 15mm screws (L) per leg. Wine Rack Plate Rack Assembly Guide Front Ensure legs are rotated as shown, ensuring support of adjoined panels at both sides.
- Page 4 TOWER UNIT 600 Feature Units Open Shelf Wine Rack Plate Rack Assembly Guide Screw into any side units using the 30mm screws (K) provided to secure to the unit. Screw just to the rear of the hinge mounting plate at the top and bottom of both sides of the unit, place a cover cap (M) on the head to conceal it.
- Page 5 TOWER UNIT Step 6. Hanging Brackets steps a,b & c to be carried out on both 600 Feature Units sides of Top Unit (C) as shown. Open Shelf Wine Rack Care to be taken. Hanging procedure Plate Rack is neccesary for a safe installation.
- Page 6 TOWER UNIT 600 Feature Units Open Shelf Wine Rack Step 9. Plate Rack Measure appropriately and attach the 2 x hanging bracket plates onto the wall screwing through the provided holes into your wall. Assembly Guide Screws for fixing to walls are not provided as these vary depending on your wall material and construction.
- Page 7 TOWER UNIT Step 13. Using 2x 30mm Screws (K) screw up through the top of Feature 600 Feature Units Unit (B) to secure it in place with Top Unit (C) as shown. Open Shelf Wine Rack Screws should be equally spaced, as shown.
-
Page 8: Door Adjustment
TOWER UNIT Door Adjustment 600 Feature Units Open Shelf Doors supplied in accordance to Customer Specific Kitchen Plan. Wine Rack Plate Rack Assembly Guide DOOR FRONTAL ADJUSTMENT To adjust hinge using a screw driver, tighten or loosen as required at points 1 & 2. - Page 9 TOWER UNIT Drawer Adjustment 600 Feature Units Open Shelf Drawers supplied in accordance to Customer Specific Kitchen Plan. Wine Rack Plate Rack Assembly Guide Drawer Frontal Adjustment Screw point 1 as shown to adjust drawer frontal right & left. Screw point 2a as shown to adjust drawer frontal up &...
- Page 10 TOWER UNIT 600 Feature Units Open Shelf Wine Rack Plate Rack Assembly Guide Page 9 For Internal Use: FI.WR.INS.093_WKIN00220_TOWER_Feature_Aperture_Assembly_Rev1.indd...
- Page 11 TOWER UNIT 600 Feature Units Open Shelf Wine Rack Plate Rack Assembly Guide For Internal Use: FI.WR.INS.093_WKIN00220_TOWER_Feature_Aperture_Assembly_Rev1.indd Page 10...
Need help?
Do you have a question about the TOWER UNIT and is the answer not in the manual?
Questions and answers