Related Manuals for Wren Vogue TOWER UNIT 600/450 + 140 Appliance
Summary of Contents for Wren Vogue TOWER UNIT 600/450 + 140 Appliance
- Page 1 TOWER UNIT 600, Appliance Door & Drawer Assembly Guide 900/600 + 290 Appliance 600/450 + 140 Appliance 900/600 + APPLIANCE UNIT SHOWN FOR ILLUSTRATIVE PURPOSES ONLY For Internal Use: FI.WR.INS.042_WKIN00142_TOWER_600_DrDrwAppRange_Rev9...
- Page 2 TOWER UNIT 600, Appliance Door & Drawer Assembly Guide BEFORE YOU START INSTALLATION SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED NOT to be used with CAM LOCK Page 2 For Internal Use: FI.WR.INS.042_WKIN00142_TOWER_600_DrDrwAppRange_Rev9...
- Page 3 TOWER UNIT 600, Appliance Door & Drawer Assembly Guide Panel D Shelf Panel A Panel B Panel C Frontals x2 Rail x2 Back Panel x4 Fixed Shelf (where applicable x2 Front Panel x2 End Panel x1 or x 2 Loose Shelf) (Packed Separately) Page 3 For Internal Use: FI.WR.INS.042_WKIN00142_TOWER_600_DrDrwAppRange_Rev9...
- Page 4 TOWER UNIT 600, Appliance Door & Drawer Assembly Guide (F) x24 (L) x24 (K) x16 (G) x20 (H) x20 Wooden 15mm 30mm Cam Lock Cam Dowel Dowel Screw Screw (Expanding) (M) x4 L Bracket (Z) x12 (N) x2 Cover Cap Shelf Peg Metal Door Buffer Hinge Mounting Plate...
- Page 5 TOWER UNIT 600, Appliance Door & Drawer Assembly Guide 900/600 + 290 Appliance Specific Step 1. Seat dowels (F) into holes in both end panels (A) as shown. Step 2. Seat expanding cam dowels (G) into holes in both end panels (A) as shown. 1468mm 1468mm 568mm...
- Page 6 TOWER UNIT 600, Appliance Door & Drawer Assembly Guide 600/450 + 140 Appliance Specific Step 1. Seat dowels (F) into holes in both end panels (A) as shown. Step 2. Seat expanding cam dowels (G) into holes in both end panels (A) as shown. 1322mm 1322mm 711mm...
- Page 7 TOWER UNIT 600, Appliance Door & Drawer Assembly Guide Step 3. Attach panels (C) & (D) to end panels (A), using expanding cam dowels (G), and wooden dowels (F) in positions as shown in Steps 1 & 2, specific to chosen appliance option. All cam lock (H) holes are to be positioned facing the outside of the unit carcase, for ease of tightening.
- Page 8 TOWER UNIT 600, Appliance Door & Drawer Assembly Guide Step 4. Measure and cut back panel (B) to suit appliance option, leaving the centre appliance aperture open. Step 5. Slide back panel (B) into groove of end panels (A). Once back panel (B) is in position, ensure the panel is flush and square with bottom of end panels.
- Page 9 TOWER UNIT 600, Appliance Door & Drawer Assembly Guide Step 6. Insert cam locks (H) and hand tighten them, this will expand cam dowels (G) and tighten the unit together. Do not use power tools with cam lock (H) Page 9 For Internal Use: FI.WR.INS.042_WKIN00142_TOWER_600_DrDrwAppRange_Rev9...
- Page 10 TOWER UNIT 600, Appliance Door & Drawer Assembly Guide Step 7. Ensure the unit is square. Secure back panel (B) with 12 x 30mm screws (K) equally spaced at the top and bottom of back panels (B) into panels (C), as shown. Ensure you screw into the centre of the panel (C) (9mm from the edge).
- Page 11 TOWER UNIT 600, Appliance Door & Drawer Assembly Guide Step 8. Position legs as shown on the diagram below. Ensure legs are rotated to also provide support to the end panels (A). Once positioned, secure each of the legs into place with 4 x 15mm screws (L) per leg. Push leg firmly down into leg base. Adjust legs to 155mm before lifting unit upright.
- Page 12 TOWER UNIT 600, Appliance Door & Drawer Assembly Guide Step 9. Attach hinge plates onto both end panels (A) as shown, using 2 screws already located in hinge plates. Hinge side to be mounted in accordance to customer specific kitchen plan. 1826mm 1826mm 1794mm...
- Page 13 TOWER UNIT 600, Appliance Door & Drawer Assembly Guide Screws for attaching to walls are not provided as these vary depending on materials, thickness and construction. Ensure appropriate fixings for wall construction are used. Step 10. Use 2 x 15mm screws (L) to secure each of the L brackets to the rear of the unit at either side.
- Page 14 TOWER UNIT 600, Appliance Door & Drawer Assembly Guide HINGE ATTACHMENT AND ADJUSTMENT Step 1. Insert hinges into frontal hinge holes provided, secure hinges with Hinge dowels the 2 x screws already located in the hinges and hinge dowels. Step 2. Attach the door to unit, clip hinges onto hinge plates and click to secure.
- Page 15 TOWER UNIT 600, Appliance Door & Drawer Assembly Guide For Internal Use: FI.WR.INS.042_WKIN00142_TOWER_600_DrDrwAppRange_Rev9...
Need help?
Do you have a question about the Vogue TOWER UNIT 600/450 + 140 Appliance and is the answer not in the manual?
Questions and answers