Table of Contents
Advertisement
36
4.19 Press the "OK" button to select the main boom.
4.20 Press the "OK" button to select the boom length.
4.21 The display shows the previously programmed or default length of the main boom. Enter
the correct main boom length by pressing the "UP" (↑) or "DOWN" (↓) buttons.
4.22 Press the "OK" button to enter the correct length.
4.23 Press the "DOWN" (↓) button twice or until exit is displayed.
4.24 Press the "OK" button to exit the operating configuration and return to the normal
operating screen. The correct data should be displayed in the operating screen, if not, refer
to the operator's manual Section 4.2. to set operating conditions.
EI65 OPERATOR'S AND CALIBRATION MANUAL
L-B B5L0082/PAT 031-300-190-015 REVISION D 04/15/99
Advertisement
Table of Contents
