PAT EI 65 Operator's Manual page 23

OPERATOR'S SECTION 17
To enter a new value of the Maximum Boom Height Preset, the operator has to push the
button "UP" (12) for increase and the button "DOWN" (11) for decrease the displayed value.
If the crane operator wants to continue with the displayed value, he has to confirm by
pushing the button "OK" (10).
Push Button "OK" (10) for next step.
STEP 5
For verification of the previously set values the Maximum and Minimum Boom Height Preset
is displayed.
Push Button "OK" (10) for next step.
STEP 6
The Setting Procedure for the Boom Height Presets is completed. The display shows the
actual crane data. To remind the crane operator of the activated Boom Height Preset the
display of the actual boom height shows a blinking colon.
L-B B5L0082/PAT 031-300-190-015 REVISION D 04/15/99