Table of Contents
Advertisement
22
3. Check the displayed main boom angle agrees with the actual angle.
4. Grease linerider sheaves.
Other than correcting the problems identified in the Malfunctions Table and replacing faulty
mechanical parts and cables, all other repairs shall be performed by PAT Authorized Service
Representatives.
8 TROUBLESHOOTING
MB 115.0 J1 85.0
J2
50.0 0J 15.0
E71
The error codes listed in the Malfunction Table will identify various faults that can occur with
the EI 65. Following the Malfunction Table are pages which explain each fault and describe
the action which shall be taken to correct the fault.
Faults within the electronic microprocessor shall be repaired by factory trained service
personnel. When these faults occur, the competent service organization shall be contacted.
EI65 OPERATOR'S AND CALIBRATION MANUAL
In case of a malfunction of the system, a code that identifies the
system malfunction will be displayed in the reeving portion of the
display.
L-B B5L0082/PAT 031-300-190-015 REVISION D 04/15/99
Advertisement
Table of Contents
