Summary Of Audible/Visual Notifications; English Display Touchpads - ADT SAFEWATCH PRO User Manual

Security system safewatch pro
Table of Contents

Advertisement

SUMMARY OF AUDIBLE/VISUAL NOTIFICATIONS

SOUND
LOUD, INTERRUPTED*
FIRE ALARM
Touchpad & External
Sounder
LOUD, CONTINUOUS*
BURGLARY/AUDIBLE
Touchpad & Ext. Sounder
EMERGENCY ALARM
ONE SHORT BEEP
a. SYSTEM DISARM
(not repeated)
b. SYSTEM ARMING ATTEMPT WITH
Touchpad only
AN OPEN ZONE
c. BYPASS VERIFY
ONE BEEP every 40 sec.
a. SYSTEM IS IN TEST MODE
Touchpad only
b. LOW BATTERY AT XMTR
TWO SHORT BEEPS
ARM AWAY
Touchpad only
THREE SHORT BEEPS
a. ARM STAY OR INSTANT
Touchpad only
b. ZONE OPENED WHILE SYSTEM IS
IN CHIME MODE
c. ZONE OPENED WHILE SYSTEM IS
IN TEST MODE
RAPID BEEPING
a. MEMORY OF ALARM
Touchpad only
b. EXT. SOUNDER WIRING FAILURE
c. SYSTEM MAIN BATTERY WEAK
d. TROUBLE
SLOW BEEPING
a. ENTRY DELAY WARNING
Touchpad only
b. EXIT DELAY ALERT
(if programmed)
*If bell is used as external sounder, fire alarm is pulsed ring (see page 29); burglary/audible emergency is steady ring.

(ENGLISH DISPLAY TOUCHPADS)

CAUSE
FIRE and ALARM are displayed; protection zone in alarm is displayed.
ALARM is displayed; protection zone in alarm is also displayed.
Also see "Exit Alarm Warning Displays and Sounds" on page 20.
a. READY is displayed. Green READY indicator is lit.
b. NOT READY is displayed, Open protection zone number is displayed after pressing
[ ] key. Green READY indicator is not lit.
c. The bypassed protection zone numbers are displayed. (One beep for each number
displayed.) BYPASS is displayed.
a. Identification Nos. of any opened zones will appear.
b. BAT is displayed with ID number of transmitter. OO displayed for wireless touchpad
AWAY is displayed. Red ARMED indicator is lit.
a. STAY or STAY and INSTANT are displayed. Red ARMED indicator is lit.
b. CHIME is displayed. Pressing READY [ ] key will display opened zone.
c. Open protection zone number is displayed.
a. FIRE and/or ALARM is displayed; zone in alarm is displayed.
b. CHECK 70 is displayed.
c. BAT is displayed with no transmitter ID.
d. CHECK is displayed. Troubled protection zone is displayed.
a. No display during delay. Exceeding the delay time without disarming causes alarm.
b. AWAY is displayed. Slow beeps change to fast beeps during last 5 seconds of exit
delay.
– 34 –
TOUCHPAD DISPLAY

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents