Panic Keys - ADT SAFEWATCH PRO User Manual

(FOR MANUALLY ACTIVATING SILENT AND/OR AUDIBLE ALARMS)
Using Your system may have been programmed to use special keys or combinations of keys to

Panic Keys

manually activate emergency (panic) functions. The functions that can be programmed are:
Silent Emergency, Audible Emergency, Personal Emergency, and Fire.
A silent emergency sends a silent alarm signal to the Customer Care Center,* but there
will be no audible alarm or any visual display indicating that a silent alarm has been initiated.
An audible emergency sends a signal to the Customer Care Center* and sounds a
loud, steady alarm at your touchpad(s) and at any external sounders that may be
connected (ALARM plus a zone number is also displayed).
A personal emergency alarm sends an emergency message to the Customer Care
Center* and sounds at touchpad(s), but not at external bells or sirens.
A Fire Alarm will send a fire alarm message to the Customer Care Center* and will
*
If connected to the
uniquely sound external bells and sirens (see page 29 for typical fire alarm displays).
Customer Care Center.
TYPICAL DISPLAYS WHEN A PANIC KEY OR KEY PAIR THAT HAS
BEEN PROGRAMMED FOR "AUDIBLE EMERGENCY" IS PRESSED.
ALA RM 99
CUSTOM DISPLAY TOUCHPAD
TO INITIATE A PANIC FUNCTION AT ANY TIME OF THE DAY OR NIGHT:
Press an active lettered panic key (A, B, or C) for at least 2 seconds. If this key is not
present on your Touchpad, press both keys of an active key pair at the same time.
Refer to next page for panic functions that have been assigned to keys on the Touchpads.
99
ALARM
ENGLISH DISPLAY TOUCHPAD
KEY [B]
– 22 –
AC
NOTE: Zone 99 is the zone
number displayed when an
Audible Emergency alarm is
NOT READY
initiated via a Panic key.
[ ] and [#]