6.2 Setting Gang Writer Parameters
Enter parameters in the dialog box shown below. For the parameter setting values that depend on the model, refer
to "Appendix B List of Configurations by Model." Parameters (1) and (6) that specify file names are required to
be entered in a full-path. Use the [Browse] button to select them from a file select dialog box.
(1)
(6)
(10)
S5U1C17001Y23 Multi-Programmer
System Manual (Rev. 1.1)
(2)
(3)
(4)
(5)
(7)
(8)
(9)
Figure 6.2.1 [Set Load Parameter] Dialog Box
Seiko Epson Corporation
6. Gang Writer Configuration
13