Establishing Connection With Icdmini; Starting Multi-Programming - Epson S5U1C17000Y23 System Manual

7. Multi-Programming

7.3 Establishing Connection with ICDmini

Click on the [ICDmini Connect] button to establish connection with the ICDminis.
Figure 7.3.1 Connection Establishment with ICDminis

7.4 Starting Multi-Programming

To start multi-programming, click on the [RUN] button or press [Enter] on the keyboard. The multi-programming
is executed in four steps, RESET, ERASE, WRITE, and VERIFY processes in order, and the process being
currently executed is indicated by the indicators (LED symbols) located at each target field that is blinking. When
each process has completed normally, the corresponding indicator lights in green.
When multi-programming for all the target systems has completed, "ALL PASS" is displayed in the execution
result display field located to the left of the [RUN] button.
2
1
Figure 7.4.1 [GangWriter] Window with "ALL PASS" Displayed
22 Seiko Epson Corporation
S5U1C17001Y23 Multi-Programmer
System Manual (Rev. 1.1)